


Hockey
-
H10 Competition Hockey goal
- Designed for top level competition, our H10 goal is the first choice for many synthetic grass venues.
Features: Top quality 75 x 50mm steel frame at goal mouth, 50 x 25mm frame that completely encloses the timber boards, boards made from plastic coated waterproof ply 17mm thick, bolt together onstruction, castors at rear to allow sideways goal movement through venue gates, net support rail to stop the net sagging, white finish.
Note: The steel frame keeps the boards off the wet playing surface and protects the board edges from ball impact. As a result, the boards last longer.
Optional: Timber boards can be lined with rubber matting.
Supplied with HN1 nets as standard.
Left: Our H10 hockey goal was used when Australia met China during the Sydney 2000 Olympics.
-
-
H12 Hockey goal
- Suited for club and school use. Similar to H10 goal with the same high quality steel frame, but supplied with wheels instead of castors and HN2 nets as standard.
-
H13 Caged Hockey goal
- Ideally suited for council parks and schools.
Features: Galvanised steel goal, steel mesh in place of net, bolt together construction, plastic coated ply boards enclosed in a frame, coated white, wheels at rear.
Note: Not suitable for competition use. Replacement boards available.
-
H32 Indoor Hockey goal
- Steel frame goal 3.0m x 2.0m with folding sides, 48ply knotted net.
Accessories
-
-
PCF PVC corner post
- Portable corner posts, 1.2m high with vinyl flag, set of four.
-
HN1 Hockey goal net
- Black knotted 3mm thick, 72ply polyethylene net, taped edging, thick net for competition use, strong and durable.
-
HN2 Hockey goal net
- Black knotted 2.2mm thick, 48ply polyethylene net, taped edging, economical net for school and club use.
-
HB17 Replacement boards
- Set of waterproof ply boards for H10, H12 or H13.
-
HR3 Synthetic rebound lining
- Impact absorbing material glued to the timber boards. Reduces ball rebound. Supplied with goals at the time of ordering.
