Basketball

• 

• SR50 Roof retractable Basketball tower

• Used for indoor or undercover multipurpose courts where the basketball unit must be moved to cater for other activities.
  The direction of retraction (forwards or backwards) depends on the structural design of the roof and the amount of space available. The unit consists of a backboard, backboard frame, extension arms, cable supports, ring and net.
  
• 
  Not included are fixing points to which the unit will be attached. Fixing points may need to be attached to the roof structure before the basketball unit can be installed.
  
• 
  The hoising mechanism to retract the unit is an additional item.
• ENGINEER CERTIFIED.
• FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. 

2. SW40 Wall mounted Basketball unit

3. Used for indoor multipurpose courts where the basketball unit must swing to the side to cater for other activites.
4. ENGINEER CERTIFIED.
5. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. Raptor side swing Basketball tower

2. Application: Used on multipurpose undercover courts. The extension arm can be mounted directly to the building structure (if suitable) without the use of a main pole. When not in use, the tower swings sideways and locks in position to allow alternative use of area.
   
   
3. Features: Twin extension arms are off-set to fold flat in the stored position, B1810 fullsize ply backboard, R11b ring and net & hand tool.
   
   
4. Benefits: The off-set hinging points allow the extension arms to fold flat against each other and lock in position. 
5. ENGINEER CERTIFIED.
6. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.

1. SHF Height adjusting backboard frame

2. Used to change the ring height from 3.05m to 2.6m for junior players.
   
3. Consisting of two frames sliding on rails, the board and ring can be adjusted from ground level using the hand tool provided.  2 x gas lifters are fitted in the frame. The frame can be used with all roof or wall mounted indoor basketball units.
   
4. Order separately when required.
5. ENGINEER CERTIFIED.
6. FULLY COMPLIES WITH QLD EDUCATION BASKETBALL EQUIPMENT SPECIFICATIONS & TESTING - OCTOBER 2007.